The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / a65 to a77 conversion

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
a65 to a77 conversion
05-17-16, 10:46 AM
Post: #1
dog3492cat Offline
Junior Member
**
 		Posts: 4
Joined: May 2016
Reputation: 0
a65 to a77 conversion
I want to replace my aging a65 with a new a77, in part so i can re-use my B60 thru-hull 'ducer that is a recommended model for both head units. I have a DSM 25 between 'ducer and current A65. Problem is the 'ducer cable going from DSM 25 to A65 is a different pin pattern than required on A77 so I cannot 'plug and play'. Questions.......with new A77 do I even need DSM any more? If not, cable from 'ducer going in to DSM has correct pin pattern to plug into A77 directly but is far too short. Is extension cable available? REally do not want to buy new transducer if I do not have to, especiallt since I would be buying exact same B60.....again?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
a65 to a77 conversion - dog3492cat - 05-17-16 10:46 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication