The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
ST5000 Plus
05-17-16, 12:46 PM (This post was last modified: 05-20-16 01:23 PM by Steve - Raymarine - Moderator.)
Post: #1
ST5000 Plus
Hello,

I own a 2nd hand boat that is equipped with the AP5000+ unit. I am obviously having problems with it and hope I can get some help here.

At slow speeds-

Unit will work fine heading east with some deviation north and south and then all of a sudden it will go of course and continue to turn of course. When heading west I cannot 50' without the boat heading of course. The heading value on the display does not change and the rudder indicator also shows on the display.

At high speeds-

The boat will stay on course for a short time but will then head off into a turn. It will also make slight S turns if staying on course.

The previous owner had a Northstar 952x Chartplotter on board and I think that the AP5000 is tied into the Northstar unit in some way. The previous owner doesn't remember much.

Could you tie the AP into a Northstar unit?
I cant find a fluxgate compass on the boat, can the AP5000 run without one?
What else should I be looking for?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
ST5000 Plus - Road Work Ahead - 05-17-16 12:46 PM
RE: ST5000 Plus - Road Work Ahead - 05-17-16, 03:17 PM
RE: ST5000 Plus - Road Work Ahead - 05-18-16, 08:23 AM
RE: AP5000 Plus - Road Work Ahead - 05-18-16, 10:12 AM
RE: AP5000 Plus - Road Work Ahead - 05-18-16, 12:22 PM
RE: AP5000 Plus - Road Work Ahead - 05-18-16, 02:27 PM
RE: AP5000 Plus - Road Work Ahead - 05-18-16, 03:42 PM
RE: AP5000 Plus - Road Work Ahead - 05-19-16, 07:20 PM
RE: AP5000 Plus - Road Work Ahead - 05-20-16, 08:36 AM
RE: ST5000 Plus - Road Work Ahead - 05-31-16, 02:18 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)