Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Replacing Dsm300 that failed
06-04-19, 08:35 PM (This post was last modified: 06-05-19 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Replacing Dsm300 that failed
Hello Bugsy,

If the DSM really has failed - most DSMs that got sent back to us as faulty turned out to work fine, the problem lying elsewhere - then I would definitely go the CP370 rather than another DSM. The CP370 is indeed a significant performance improvement. Think of it as the difference in power and economy from a modern engine compared to one of the same size/capacity from 15 years ago, which is when the DSM's design dates from. You'll see better target separation and clarity, better range performance and a world of difference in the hands-free automatic operation.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Replacing Dsm300 that failed - Tom - Raymarine - Moderator - 06-04-19 08:35 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)