The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] E120 time shifts between current time and offset time
06-03-19, 10:00 PM (This post was last modified: 06-04-19 04:50 PM by Chuck - Raymarine - Moderator.)
Post: #1
E120 time shifts between current time and offset time
I have 2 x Raymarine E120s connected to a Raystar 130 GPS antenna. I've got the NMEA 0183 to NMEA 2000 adapter for the GPS antenna to network to the older E120.

Now for my issue: I have "Local Time" as one of my displayed databox options on the databar. The local time is set at (-4.0) from the GMT time zone so the accurate local time is displayed. The problem is, about every 15 seconds, the time shifts from the accurate local time, to the unadjusted time 4 hours later. Back and forth it changes. At first I thought the GPS was losing satellite connectivity and was defaulting to the unadjusted GMT time. However, the GPS signal is never lost and always shows a "fix".

Any ideas are much appreciated!


Attached File(s)
.mov  IMG_6031.MOV (Size: 2.51 MB / Downloads: 272)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
E120 time shifts between current time and offset time - DenverDave - 06-03-19 10:00 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)