The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Instruments v / [CA] [CA11] P79 transducer to Axom 7 DV problems

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] P79 transducer to Axom 7 DV problems
06-09-19, 02:48 PM (This post was last modified: 06-11-19 12:36 PM by Chuck - Raymarine - Moderator.)
Post: #1
Iain Offline
Junior Member
**
 		Posts: 1
Joined: Apr 2019
Reputation: 0
[CA11] P79 transducer to Axom 7 DV problems
I recently purchased a Raymarine Axom 7 with Downvision.
I made this purchase with the plan to utilize my never installed raymarine P79 transducer. I verified with raymarine rep that this would work and that I need adapter cable A80485. Neither This adapter cable and nor one other adaptor that was incorrectly sent to me would work.

I spoke again to a raymarine rep after my second failed attempt and he said that my Raymarine P79 was not usable because it has a 6 Pin connector port. Is this correct?

He said I need to purchase another raymarine P79 transducer E66008 and then purchase adaptor A80484(7 to 9pin connector) is this correct? The product description on the raymarine P79 transducer that is has an 8 PIn connector.

Are there any downvision transducers that are comparable with the Axom 7 without an adaptor cable?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] P79 transducer to Axom 7 DV problems - Iain - 06-09-19 02:48 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication