[DG] [DG11] Log and speed inop

[Derek - Raymarine - Moderator]

Hi PetriS

Thankyou for your enquiry,

The Log, ( odometer) reading is derived from the speed transducer and so if the paddlewheel is not rotating or faulty, then the log will not update either.

Please check the connections into the itc5, where is the screen, ( shield or bare wire from the DST800) connected to?
The Screen of the DST800 t should only be connected to the Screen connection of the depth connectors in the ITC5. If you have a separate Speed and Depth transducer, then ignore this suggestion!

Unfortunately, there is no way to manually modify the log reading, which is held in the iITC5.

Thanks
Derek