The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / [LW] [LW11] Update E120 doesn't work

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Update E120 doesn't work
06-17-19, 01:31 PM (This post was last modified: 06-20-19 09:12 AM by Louise - Raymarine - Moderator.)
Post: #1
SITA02 Offline
Junior Member
**
 		Posts: 1
Joined: Jun 2019
Reputation: 0
[LW11] Update E120 doesn't work
I bought some new charts for my MFD E120. Before I had to update from software version 3.15 to 5.69. I bought a 128 mb compactflash and downloaded the update file from the raymarina website. After extracting the files and putting them in the root folder of the CF-card, i inserted the card in the MFD. The MFD was turned off during that time. After turning on, the MFD just starts in the normal mode. I tried so much and spent a lot of money on the new charts.

Has anybody an idea why the MFD is not recognising the update files?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Update E120 doesn't work - SITA02 - 06-17-19 01:31 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication