Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] Using raynet for navionics only problem

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Using raynet for navionics only problem
06-19-19, 03:53 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Using raynet for navionics only problem
Welcome to the Raymarine Forum Brent,

When the MFDs are networked to one another, they are indeed designed to share all data. That said, Master MFD shares its page settings with the other networked MFD. Accordingly, should the system feature two transducers, then you may want to consider creating a second Fishfinder application page. After doing so, one may be configured to display the Fishfinder channel(s) associated with one transducer while the other is configured to display the Fishfinder channel(s) associated with one transducer. These Fishfinder pages may then be renamed to reflect the which transducer is supplying the data. (ex. Bow FF, Stern FF)
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Using raynet for navionics only problem - Chuck - Raymarine - Moderator - 06-19-19 03:53 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication