Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Adding i70 MFD
07-16-19, 09:38 AM
Post: #6
RE: [CA11] Adding i70 MFD
Adam,

The first step in addressing the reported symptom would indeed be to ensure that both the MFD and i70 MFID have each been updated with the latest available Raymarine product software. After doing so, the Select Devices list of the MFD (HOME->SET-UP->MAINTENANCE->DIAGNOSTICS->SELECT DEVICE) should list both the MFD and the i70 MFID. From the standpoint of data shared between the MFDs, it would be expected that depth & water temperature (a compatible fishfinder transducer must be interfaced to the a128 MFD), current coordinates (if the MFD has acquired a GPS position FIX), COG/SOG (only if the vessel is moving), BTW/DTW (if Go To or Follow Route has been commanded), etc. should be displayed by the i70 MFID if configured to display these data items.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Adding i70 MFD - AJPOWERPLAY - 06-20-19, 10:40 PM
RE: [CA11] Adding i70 MFD - AJPOWERPLAY - 06-21-19, 08:20 PM
RE: [CA11] Adding i70 MFD - AJPOWERPLAY - 07-16-19, 12:52 AM
RE: [CA11] Adding i70 MFD - Chuck - Raymarine - Moderator - 07-16-19 09:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)