MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] SPX5 SeaTalk to NMEA 0183


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] SPX5 SeaTalk to NMEA 0183
06-25-19, 04:20 PM (This post was last modified: 06-26-19 03:01 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] SPX5 SeaTalk to NMEA 0183
I want to get GPS info into a Simrad RS35 VHF for DSC/AIS.
I have a Garmin GPSMAP 640 at the helm, outputting into a ST6001 Pilot controller via NMEA 0183. The ST6001 is connected via SeaTalk to the SPX5 Course computer via SeaTalk. I am using the NMEA out on the SPX5 into the RS35 NMEA input - but no joy.
The C80 MFD is seeing Nav info from the GPSMAP 640 via the Seatalk net.

Does the SPX5 bridge GPS info from Seatalk to its NMEA out?

Diagram attached.

Thanks!
Fyaskin
C320 #380
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] SPX5 SeaTalk to NMEA 0183 - Frankya - 06-25-19 04:20 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)