[CA] [CA11] GS125, VHF RAY260 AIS not working
|
07-02-19, 11:05 AM
Post: #2
|
|||
|
|||
RE: [CA11] GS125, VHF RAY260 AIS not working
Welcome to the Raymarine Forum Eddie,
Per our phone conversation, it recommended that you ensure that Ray260's AIS feature has been enabled: Switching the AIS function on and off The AIS function on the Ray260 AIS and Ray260E AIS can be switched on or off. From the main menu: 1. Select CONNECTION. 2. Select AIS. 3. Select ON or OFF as required. Additionally, with the built-in AIS receiver switched on AIS information can be sent to a connected Raymarine multifunction display using either the NMEA 0183 or SeaTalkng connections. Note: If using the built-in AIS receiver and outputting over NMEA 0183, ensure that the baud rate is set to high speed: Menu > Connection > Interface > NMEA 0183 > HIGH |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] GS125, VHF RAY260 AIS not working - eddiejaimes - 06-27-19, 09:50 AM
RE: [CA11] GS125, VHF RAY260 AIS not working - Chuck - Raymarine - Moderator - 07-02-19 11:05 AM
|
User(s) browsing this thread: 1 Guest(s)