The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Unable MFD e7 to send GPS position to VHF
06-28-19, 04:47 AM (This post was last modified: 07-03-19 05:08 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Unable MFD e7 to send GPS position to VHF
Hi,

My e7 (n°62354 0130 508) is connected to the input of the VHF RT550 via NMEA 0183.

When I turn on the devices, the VHF doesnt receive the GPS position.
Diagnostic screen shows that GPS position sentences are well sent in the buffer of NMEA 0183 port 1.

Then, I change the NMEA setting :
Home/ Setup/ NMEA/ NMEA input port 1 >> "4800"

I come back to home sceen

and, I change again NMEA setting :
Home/ Setup/ NMEA/ NMEA input port 1 >> "AIS 38400"
And I come back to home screen... and then, VHF receives GPS position !!!


I updated the e7 software (R19-v19.03a_v19.00p_v1.20G_v1.20n_v1.20r_v1.20j_v17.03m-ISO), but no improvement.

Many thx for your help.

regards
Jean-Pierre
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Unable MFD e7 to send GPS position to VHF - Arsouin - 06-28-19 04:47 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)