[TG] [TG11] Ais 700 "saw "targets only 0.3 nm range
|
07-02-19, 06:40 AM
(This post was last modified: 07-19-19 07:53 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[TG11] Ais 700 "saw "targets only 0.3 nm range
Hallo, my ais 700 interfaced with my old raymarine c80 was always fine, targets visibility at 10/12 nautical miles. Last week the system shows me only a range of 0.3 nautical miles ais target. I was thinking was the antenna whf on the top of my mast, I changend the antenna with a brand new Banten one. Nothing is change. My whf is a foruno and it work fine. I have also done the diagnostics with the pro ais, all is marked "green" and also the light on the ais 700 is green.
What can be ? Thank you Antonio |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] Ais 700 "saw "targets only 0.3 nm range - toniocask - 07-02-19 06:40 AM
RE: [TG11] Ais 700 "saw "targets only 0.3 nm range - Tom - Raymarine - Moderator - 07-10-19, 01:30 AM
RE: [TG11] Ais 700 "saw "targets only 0.3 nm range - toniocask - 07-19-19, 05:39 AM
RE: [TG11] Ais 700 "saw "targets only 0.3 nm range - marlahe - 07-22-19, 07:48 PM
RE: [TG11] Ais 700 "saw "targets only 0.3 nm range - marlahe - 07-22-19, 07:59 PM
RE: [TG11] Ais 700 "saw "targets only 0.3 nm range - Tom - Raymarine - Moderator - 07-22-19, 11:37 PM
|
User(s) browsing this thread: 1 Guest(s)