Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 3 Average
  • 1
  • 2
  • 3
  • 4
  • 5
AUTO ok, TRACK seems to hunt
05-25-16, 09:25 AM
Post: #3
RE: AUTO ok, TRACK seems to hunt
Welcome to the Raymarine Forum Keith,

The Reset XTE feature would not be used for this purpose. Essentially, the Reset XTE feature will cause a new course line to be drawn from the vessel's current position to the destination waypoint, effectively zeroing the XTE. The Pilot Response feature would typically be the feature used to control the amount of autopilot corrections performed and how closely the autopilot will track to the course line.

It is recommended that the autopilot's software levels be checked to ensure that the Evolution autopilot components have been updated with the latest software updates. It is further recommended that any speed through water transducers be checked for problem operation and calibration. Please click here to view a FAQ addressing this subject. Should a rudder transducer not have been fitted to the system, then you may want to consider installation of a rudder transducer to further improve the autopilot's performance.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: AUTO ok, TRACK seems to hunt - Chuck - Raymarine - Moderator - 05-25-16 09:25 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)