[LW] [LW11] E7 radar overlay

[Louise - Raymarine - Moderator]

Dear dcneuro,

Thank you for your post.

All of these issues indicate the lack of heading data;

1) your vectors require heading data to enable them to make the calculations.
Please refer to section 14.17 on page 193 of the Lighthouse 2 manual.

2) The chart offset requires heading data or COG data once underway to enable this function.

3) Can you confirm what revision of Lighthouse 2 you have on your E7?

4) On your wind instrument you state wind angle is working but wind speed is not, what do you see when in true wind mode and apparent wind mode? Have you got dashes, zeros or random figures?

5) Have you got the new EVO pilot installed? Is this integrated in to your network?

6) Can you send a system diagram in to us with all of the products and their software revisions?

7) Can you send a screenshot of the chart showing heading data, you may need to configure a data box for this. In the chart application>menu>presentation>databoxes>select heading

You can send this to support.uk@raymarine.com

Here is a link to the Lighthouse 2 manual available to download from our website here.

Is the radar overlay working now?

Many Thanks
Louise