Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Ray 240 VHF with e120W
07-12-19, 10:38 AM (This post was last modified: 07-15-19 10:37 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [LW11] Ray 240 VHF with e120W
Thanks. So to be clear before i cut my $34 cable (lol) -- i'll cut my adapter cable -- the ST1 (rectangular female connector) to STNG cable coming from the VHF Transceiver into my STNG backbone (2 halves at that point; then only connect the yellow wire to yellow wire (data); green to green (-12VDC); dropping the Red (+12VDC) out of the loop. And then just plug that back into the backbone and transceiver. Correct?

Thanks

Picture attached of the Converter Kit I purchased for about $100 at West Marine.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Ray 240 VHF with e120W - Bdfritz - 07-11-19, 02:55 PM
RE: [LW11] Ray 240 VHF with e120W - Bdfritz - 07-12-19 10:38 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)