[CA] [CA11] SR150 Not displaying wind & wave graphics
|
07-16-19, 08:02 PM
(This post was last modified: 07-24-19 10:58 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] SR150 Not displaying wind & wave graphics
Hi Tech,
That data was displaying earlier this year. Neither are Cloud Tops & Marine Forecasts--Marine Zone Areas do display. Nowrad, Storm Casts, etc. is displaying. I have read your response dated 1/10/17, all advice posted there is acknowledged including patch 20150209. I have also had a refresh signal sent by Sirius. Not Populating: Marine Zones: Areas are outlined but “No information available†message Wind Vectors Wave Direction Wave Height Wave Period Cloud Tops Surface Pressure Populating: Storm Cast NOWRAD Storm Tracks Surface Observation Stations Marine Zone Stations Thanks, John |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-16-19 08:02 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-22-19, 01:22 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-23-19, 07:06 AM
RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-23-19, 02:23 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-23-19, 04:28 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-25-19, 12:33 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - John Pecora - 07-25-19, 04:26 PM
RE: [CA11] SR150 Not displaying wind & wave graphics - Chuck - Raymarine - Moderator - 07-26-19, 07:53 AM
|
User(s) browsing this thread: 1 Guest(s)