Adding second depth sounder to C125 MFD
|
05-25-16, 03:19 PM
Post: #4
|
|||
|
|||
RE: Adding second depth sounder to C125 MFD
Pete,
As the CP200 is a side-looking sonar, it is not designed to report depth and should not be considered for this application. Per the prior response, an in-hull transducer should not be installed in a location where the hull is less than 1" thick. In such case a thru-hull transducer would be recommended. You may want to consider installation of a CP100 CHIRP (conical) / DownVision Sounder Module and compatible thru-hull transducer (ex. A80350 CPT-120, etc.). Alternatively, you may want to consider installation of a CP370 and a 600W low profile thru-hull transducer (ex. E66014 B117, etc.). |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
Adding second depth sounder to C125 MFD - peteatbeach - 05-23-16, 09:31 AM
RE: Adding second depth sounder to C125 MFD - Chuck - Raymarine - Moderator - 05-23-16, 02:47 PM
RE: Adding second depth sounder to C125 MFD - peteatbeach - 05-25-16, 09:58 AM
RE: Adding second depth sounder to C125 MFD - Chuck - Raymarine - Moderator - 05-25-16 03:19 PM
|
User(s) browsing this thread: 1 Guest(s)