[TG] T120 wireless wind transducer pairing

[donotsellmyname@yahoo.com]

I recently purchased the T120 wireless wind transducer along with the MicroNet Wireless Gateway, the T113 Multifunction remote, and an i60 Wind Instrument. The plan is to network all of these to my Raymarine e7 MFD.

Problem: Nothing in the transducer box caught my eye before I mounted it on the mast head when the mast was in its winter position (stored on easily accessible saw horses). Now the boat is in the water and I've wired up the Micronet Wireless Gateway and paired it with the T113 remote. But, it appears that pairing of the wireless components can only be done when the components are within 300mm (11.8"). Is this the case for the wind transducer? Do I really need to go up the mast to take it down in order to pair it? If so, a bright red slip of paper in the transducer box with this notification would have been a welcome bit of information.

Can I just pair the transducer with the T113 remote (thus requiring only one round trip up the mast rather than two), or does the Micronet Wireless Gateway also require a 300mm proximity for pairing to the transducer?

Thanks for any suggestions about pairing these components.

Jack