Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] Autopilot accuracy

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Autopilot accuracy
07-30-19, 03:08 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] Autopilot accuracy
Welcome to the Raymarine Forum tmod30,

The radius of the arrival circle surrounding a waypoint being navigated to is not determined by the autopilot ... it is determined by the navigational system supplying the autopilot with steering data ... in this case, it is the eS75 MFD. The default setting for the arrival circle radius is 0.1nm and may be adjusted to suit the speed of the vessel. The command sequence for accessing the arrival circle radius within a MFD running LightHouse II v19.03 software is HOME->SET-UP->ALARMS->SAFETY ALARMS->WAYPOINT ARRIVAL->WAYPOINT ARRIVAL RADIUS. The command sequence for accessing the arrival circle radius within a MFD running LightHouse 3 v3.10.39 software is HOME->ALARMS->SETTINGS->(waypoint) ARRIVAL RADIUS.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Autopilot accuracy - tmod30 - 07-26-19, 05:33 AM
RE: [CA11] Autopilot accuracy - Chuck - Raymarine - Moderator - 07-30-19 03:08 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication