Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom talking to ST70 pilot control
07-31-19, 02:11 PM
Post: #2
RE: [CA11] Axiom talking to ST70 pilot control
Welcome to the Raymarine Forum John,

For clarification purposes, commanding navigation (i.e. commanding Go To Cursor / Waypoint or Follow Route) from a MFD running LightHouse 3 software will not automatically engage any autopilot other than an Evolution autopilot. Within such systems, the autopilot's control head must be used to command the autopilot into Track mode after first having commanded navigation via the MFD. SPX autopilot component should not be interfaced to the system via a SeaTalk to SeaTalkng Converter. Instead, the ST70 Autopilot Control Head and SPX Autopilot Course computer must each instead be interfaced as an individual spur to the system's powered and properly terminated SeaTalkng / NMEA 2000 backbone.

SPX autopilot components must be updated with the latest available software or they may not support proper communications with MFDs running LightHouse 3 or LightHouse II software. Unfortunately, SPX autopilot components are not designed to be updated by Axiom/Axiom Pro/Axiom MFD. Should you have one of the legacy MFDs which were designed to update software within SPX autopilot components (see the SPX Autopilot Course Computer software update web page and ST70 Autopilot Control Head software update web page, then the software within these components may be updated by a Certified Raymarine Installer or by Raymarine’s Product Repair Center.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom talking to ST70 pilot control - Chuck - Raymarine - Moderator - 07-31-19 02:11 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)