[CA11] Adding EV-400 to E120 classic

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA11] Adding EV-400 to E120 classic

08-16-19, 10:30 AM (This post was last modified: 08-30-19 05:47 AM by bluebyu.)

Post: #5

bluebyu Offline

Junior Member

Posts: 7
Joined: Jul 2019
Reputation: 0

RE: [CA11] Adding EV-400 to E120 classic

Good Morning,

Updated my system drawing. It is attached.

If the drawing is correct, my only concern is the wiring between
the ST60+, RS125GPS and the D244. (the SeaTalk 1 network)

The GPS's other 3 wires will not be connected? (will be insulated)

The ST60+ and the GPS will get power AND data from the yellow and shield connection?

As always, thanks to Raymarine for the support.

Mark

(Edit by Bluebyu 8-30-19, removed drawing as it is incorrect)

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Adding EV-400 to E120 classic - bluebyu - 07-30-19, 09:30 AM

RE: [CA11] Adding EV-400 to E120 classic - Chuck - Raymarine - Moderator - 08-02-19, 12:20 PM

RE: [CA11] Adding EV-400 to E120 classic - bluebyu - 08-03-19, 07:07 AM

RE: [CA11] Adding EV-400 to E120 classic - Chuck - Raymarine - Moderator - 08-05-19, 09:16 AM

RE: [CA11] Adding EV-400 to E120 classic - bluebyu - 08-16-19 10:30 AM

RE: [CA11] Adding EV-400 to E120 classic - Chuck - Raymarine - Moderator - 08-19-19, 02:48 PM

RE: [CA11] Adding EV-400 to E120 classic - bluebyu - 08-29-19, 01:23 PM

RE: [CA11] Adding EV-400 to E120 classic - Chuck - Raymarine - Moderator - 08-29-19, 02:34 PM

RE: [CA11] Adding EV-400 to E120 classic - bluebyu - 09-04-19, 03:20 PM

RE: [CA11] Adding EV-400 to E120 classic - Chuck - Raymarine - Moderator - 09-09-19, 11:43 AM

User(s) browsing this thread: 1 Guest(s)