The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [LW] [LW11] Radar display

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Radar display
08-01-19, 06:15 PM (This post was last modified: 08-14-19 03:48 AM by Louise - Raymarine - Moderator.)
Post: #1
Philtadd Offline
Junior Member
**
 		Posts: 6
Joined: Jul 2019
Reputation: 0
[LW11] Radar display
I have a 4kw 18” Digital Radome connected to an e7 mfd. The software on the mfd is 19.03. This used to work well but coming up to Fiji from NZ we tried the radar for picking up squalls, nothing showed, worrying because of the number of squall we could see. Over the he last week I have checked all connections and the settings. I have tried the radar in an anchorage with other boats and high cliffs, nothing shows except what I would describe as clutter in a continuous ring at 0.5 miles if I turn the gain up enough. Nothing shows when I try to overlay on the chart display.
Any suggestions welcomed, this appears to have occurred after a repair to the display control knob/joystick in New Zealand.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] Radar display - Philtadd - 08-01-19 06:15 PM
RE: [LW11] Radar display - Philtadd - 11-13-19, 03:30 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication