MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[LW11] S2 smart pilot and PC

Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] S2 smart pilot and PC
08-03-19, 04:25 AM (This post was last modified: 08-16-19 03:51 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] S2 smart pilot and PC

On my boat I have a S2 smart pilot connected to a ST6001 and ST60 through seatalk bus. I use the "Adrena" software ( on a PC an want to connect it to the S2 module to control the navigation (waypoints defined on the PC). To do that, I will connect one NMEA entry of the S2 to the PC. From what I read in the documentation about the "extracted information" of the NMEA input, this should work. Can someone confirm that using the NMEA connction I will be able to control the track of the boat through my computer ?

Best regards.
Find all posts by this user
Quote this message in a reply
Post Reply 

Messages In This Thread
[LW11] S2 smart pilot and PC - Paul-Henri - 08-03-19 04:25 AM

Forum Jump:

User(s) browsing this thread: 1 Guest(s)