MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[CA11] Chart blank after switching views - Axiom Pro 16


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Chart blank after switching views - Axiom Pro 16
08-06-19, 05:07 PM (This post was last modified: 08-08-19 09:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Chart blank after switching views - Axiom Pro 16
Hello Moderators and Forum Members,

Here is my issue.... I'll be in a certain view, such as Chart/Radar, and everything is working great. I will switch views, say to Chart/Camera. The Chart pane will show only blue (it's blank). Zooming in or out does not resolve the issue. The other pane works fine.

To resolve the issue, I will click on Home and return to my previous view. Usually the Chart will work in the previous view. I'll try to switch views again, and sometimes Chart will work in the desired view on the second, third, or fourth try. Rarely I'll need to reboot, and that seems to help. I'm doing all this while navigating, so it's not ideal.

Any advice on how to resolve the issue? I am running software version 3.9.46 with Navionics 913P+.

Thank you,

Adam
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] Chart blank after switching views - Axiom Pro 16 - bellinghamAdam - 08-06-19 05:07 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)