European Union (.eu)
United States (.com)
United Kingdom (.co.uk)
Australia (.com.au)
Denmark (.dk)
Finland (.fi)
France (.fr)
Germany (.de)
Italy (.it)
Norway (.no)
Netherlands (.nl)
Spain (.es)
Sweden (.se)
Search
Member List
Calendar
Help
Raymarine forum
/
Raymarine Forums
/
Networking / System Integration 
/
[TG] [TG11] Adding Element S to STNG network with Axiom 9
/
[TG] [TG11] Adding Element S to STNG network with Axiom 9
|
[TG] [TG11] Adding Element S to STNG network with Axiom 9
|
|
08-20-19, 02:31 AM
(This post was last modified: 11-14-19 07:45 PM by Chuck - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
|
RE: [TG11] Adding Element S to STNG network with Axiom 9
Hello Indulgence,
At the current time, you cannot put these displays into the same NMEA2000 network. The Element will prompt a warning saying that an incompatible MFD has been detected and will not be usable until this has been disconnected and the Element power-cycled afterwards. I don't have information on the exact reason for this, but I would guess that it's to do with the different ways the displays' different software synchronise things like data-source selection. Regards, Tom |
|||
|
|
« Next Oldest | Next Newest »
|
| Messages In This Thread |
|
[TG11] Adding Element S to STNG network with Axiom 9 - Indulgence - 08-09-19, 06:31 AM
RE: [TG11] Adding Element S to STNG network with Axiom 9 - Tom - Raymarine - Moderator - 08-20-19 02:31 AM
RE: [TG11] Adding Element S to STNG network with Axiom 9 - Pete7 - 11-14-19, 05:03 PM
RE: [TG11] Adding Element S to STNG network with Axiom 9 - Tom - Raymarine - Moderator - 11-19-19, 11:26 PM
RE: [TG11] Adding Element S to STNG network with Axiom 9 - Pete7 - 12-05-19, 08:43 AM
|
User(s) browsing this thread: 1 Guest(s)