Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro S with CPT120?
10-28-19, 09:15 AM
Post: #6
RE: [CA11] Axiom Pro S with CPT120?
Bill,

Q1. However, its (CP100) specs only list the following MFDs as compatible -- aSeries, cSeries, eSeries, the New eS Series and gS Series.
A1. Unfortunately, the documentation and website are lagging with respect to sonar module compatibility. All Axiom/Axiom Pro/Axiom XL MFDs running the latest LightHouse 3 software are compatible with the following sonar modules:
- CP100
- CP200
- CP370
- CP470
- CP570
- RVX-1000

Q2. My Axion Pro S MFD does have one available RayNet port and is linked to a SeaTalkNG backbone cable with available ports for other RayNet devices. Will the Axiom Pro S read the CP100 via one of those cabling options, or I need to run it through a RayNet switch?
A2. Should your MFD currently have an unoccupied Ethernet Network (RayNet) socket, then it may indeed be used to interface the MFD to the CP100 via an appropriate length of RayNet (F) to RayNet (F) Cable.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Axiom Pro S with CPT120? - Chuck - Raymarine - Moderator - 10-28-19 09:15 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)