Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] AIS NMEA 2000 MFD Series C Firmware 19 Support
08-22-19, 10:25 AM (This post was last modified: 08-22-19 10:26 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] AIS NMEA 2000 MFD Series C Firmware 19 Support
Welcome to the Raymarine Sean,

Raymarine has produced three generations of MFDs featuring "C" or "c" within its name. These were the:
- C-Series Classic MFDS (C70, C80, C120)
- C-Series Widescreen MFDs (C90W, C120W, C140W)
- c-Series MFDs (c95/c97, c125/c127)

Of the above listed MFDs the all supported integration with 38400 BAUD NMEA 0183 AIS receivers / transceivers. Of the above listed MFDs, when operating with the latest available software the C-Series Widescreen MFDs and c-Series MFDs alternatively supported integration with SeaTalkng / NMEA 2000 AIS receivers / transceivers. Unlike NMEA 0183 devices, SeaTalkng / NMEA 2000 devices are not designed to be interfaced directly to one another. Instead, such devices are each designed to be interfaced as a spur to a powered and properly terminated SeaTalkng / NMEA 2000 backbone.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] AIS NMEA 2000 MFD Series C Firmware 19 Support - Chuck - Raymarine - Moderator - 08-22-19 10:25 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)