Raymarine forum / Raymarine Forums / Multifunction Displays v / cursor does not move with vessel symbol

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cursor does not move with vessel symbol
06-06-16, 03:36 PM
Post: #6
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: cursor does not move with vessel symbol
captc36,

It is recommended that you ensure that the Chart view is configured to 2D in any of the affected Chart page/panes and then configure the Chart Synch feature to OFF within each of the MFD's Chart application pages/panes prior to changing the motion mode.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: cursor does not move with vessel symbol - Chuck - Raymarine - Moderator - 06-06-16 03:36 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication