Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Interfacing Raymarine to Standard horizon
05-31-16, 10:29 AM (This post was last modified: 05-31-16 10:51 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Interfacing Raymarine to Standard horizon
Welcome to the Raymarine Forum hiltz,

Should the third party chartplotter also support 4800 BAUD NMEA 0183 v3.01 communications, then its NMEA 0183 output leads may be interfaced to the NMEA 0183 input leads of the C-Series Classic MFD's NMEA 0183 Cable to support sharing GPS data with the C-Series Classic MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Interfacing Raymarine to Standard horizon - Chuck - Raymarine - Moderator - 05-31-16 10:29 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)