[CA] [CA11] CPT 120 dv transducer
|
09-23-19, 08:45 PM
(This post was last modified: 09-24-19 11:00 AM by Chuck - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
[CA11] CPT 120 dv transducer
Hi I have an issue with my es128 mfd were the transducer on broken off. So I purchased cp100 module to connect the transducer to it then to the network. The problem is that I need to splice a new connector on the end of the transducer cable because one of the pins is broken off. I went to a raymarine authorized dealer and they sold me a cable extension. When I cut off the end they were more bundles of wires in the new cable end. The cpt120 cable only has 2 twisted pairs black red and two bare wires. The new end had 4 twisted paires black, red, white and two bare wires. which wires do I connect together to add the new end or did the guy sell me the wrong connector even though the pins at the end are the same. fits the socket.
|
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[CA11] CPT 120 dv transducer - senangsekali - 09-23-19 08:45 PM
RE: [CA11] CPT 120 dv transducer - Chuck - Raymarine - Moderator - 09-24-19, 11:21 AM
RE: [CA11] CPT 120 dv transducer - senangsekali - 09-24-19, 07:11 PM
RE: [CA11] CPT 120 dv transducer - Chuck - Raymarine - Moderator - 10-01-19, 01:39 PM
|
User(s) browsing this thread: 1 Guest(s)