The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [TG] incorrect depth when fast

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] incorrect depth when fast
09-26-19, 03:13 PM (This post was last modified: 09-27-19 12:46 AM by Tom - Raymarine - Moderator.)
Post: #1
r0ckteacher Offline
Junior Member
**
 		Posts: 2
Joined: Apr 2019
Reputation: 0
incorrect depth when fast
I had a new fishfinder installed this spring. I noticed that when I'm going fast it shows 1200ft depth in 30ft. Also, it has vertical lines about every inch. My installer says it's not because of transducer in the wrong location, but programming. Now he's not returning my calls. Any ideas what the cause might be?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
incorrect depth when fast - r0ckteacher - 09-26-19 03:13 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication