[CA] [CA11] AIS 700 - Errors on power

[nickvh]

Hi Team,

After i recieved my new replacement 700, plugged it in and everything seemed to work fine on the chartplotter and i can see my AIS signals going out - so great. The i plug in to check settings via USB and notice a power error. Looking more closely, Volts show as 29.2V. Firstly the specs for this unit show 12-30v i believe so that should be ok, but the Unit shows error even though it behaves perfectly.

Then i noticed if i switched off the battery charge the bolts dropped as you would expect to around 25/26v and the error on the AIS unit goes away.

Sailing for the weekend and no issues at all.

I'm not overly concerned since i dont use AIS while on shorepower other than for testing but curious as to why this is showing up as an error?