Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raydome digital rd424d to a series
10-16-19, 01:39 PM
Post: #4
RE: [CA11] Raydome digital rd424d to a series
Teamsouthbound,

You need to look at the Digital Radar Cable and determine whether it has been terminated with a RJ45 Plug (see photo below). These Digital Radar Cables were first introduced to support use of Digital radomes and HD/SuperHD open arrays with Raymarine's E-Series Classic MFDs, C/E-Series Widescreen MFDs, and G-Series systems. If so, then either of the options which I had previously supplied will work. The second of the two options would be used if the cable needs to be extended to the location of the MFD.

[Image: 300px-Rj45plug-8p8c.png]

Raymarine later introduced Digital Radar Cables featuring a round RayNet (F) plug which is designed to be mated to the Ethernet Network socket of a/c/e/eS/gS-Series MFDs, Axiom/Axiom Pro/Axiom XL MFDs, and the HS5 RayNet Network Switch. Should the Digital Radar Cable which you presently have be terminated with a RayNet (F) plug, then no adaptation should be required to permit a a127/128 MFD to be mated to the Digital Radar Cable.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] Raydome digital rd424d to a series - Chuck - Raymarine - Moderator - 10-16-19 01:39 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)