The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error





Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] S100 handset replacement
10-17-19, 08:54 PM (This post was last modified: 10-21-19 01:26 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] S100 handset replacement
I recently suffered a little mishap with my S100 wireless remote. The remote got lodged in something while the lanyard was around my neck, and I stood up and accidentally gave it a big tug, causing the little plastic bar to break off. Fortunately I did not lose the handset. I've attempted a repair by drilling a small [censored] in the bottom, threading in a SS screw eye, and Krazy Glue-ing the screw eye in from outside and inside. I expect to get many years more service from it. I'll test it when I get back to the boat.

But just in case it doesn't work, I was wondering whether I would replace just the handset only and keep using my RF Base. I've seen ads for the handset only, but wondering whether it would be compatible with my current RF Base in my boat. Are these things programmed with serial numbers that prevent mixing handsets? Also, I see that some S100 handsets are black, while mine is gray. Does that make a difference in compatibility?

Finally, would the Smart Controller handset work with my RF base station (instead of the S100), or does it require its own RF base that's a different design?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] S100 handset replacement - Breakin Away - 10-17-19 08:54 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)