The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Product and Feature Suggestions v / [CA] [CA11] All routes showing up on charts

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] All routes showing up on charts
10-18-19, 02:17 PM (This post was last modified: 10-21-19 01:25 PM by Chuck - Raymarine - Moderator.)
Post: #1
nharrison5 Offline
Junior Member
**
 		Posts: 28
Joined: Jul 2016
Reputation: 0
[CA11] All routes showing up on charts
Previous to updating LH 3 to the latest version (v3.10.71) on my eS127, only the active route would show up on the Navionics chart. After the update, all routes show up, whether active or not.

Since I have multiple overlapping routes on a narrow river system, whenever I pan out to ensure that I am in the main channel, the map is now obscured by the waypoint icons for the routes. Please see the attached example. The route at the top right is the one I have active. The ones in the lower left are the inactive ones.

Is there a way to “turn off” all routes except for the active ones?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] All routes showing up on charts - nharrison5 - 10-18-19 02:17 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication