[CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer

10-19-19, 02:03 PM (This post was last modified: 10-21-19 03:17 PM by Chuck - Raymarine - Moderator.)

Post: #1

m095354 Offline

Junior Member

Posts: 1
Joined: Mar 2016
Reputation: 0

[CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer

When first powered up, controller displays, (for approx 4 seconds), No Pilot. After 4 seconds Seatalk Failure message appears. If I disconnect the yellow (seatalk) wire at the computer the No Pilot message stays on. Only controller and computer are linked... all other instruments isolated. Does this mean computer is no good?

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer - m095354 - 10-19-19 02:03 PM

RE: [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer - Chuck - Raymarine - Moderator - 10-21-19, 03:26 PM

User(s) browsing this thread: 1 Guest(s)