Raymarine forum / Raymarine Forums / Autopilots v / [CA] [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer
10-21-19, 03:26 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer
Welcome to the Raymarine Forum m095354,

The reported communications failure may be rooted within the SeaTalk communications circuitry of the control head, course computer, or both. This problem is generally fault isolated by interfacing each of these items one by one to working SeaTalk bus to then determine whether communications within the SeaTalk bus ceases or continues. Should the fault be isolated to the autopilot control head, then there is a possibility (depending upon the model of autopilot course computer which has been installed onboard) that it may be replaced with a p70/p70R autopilot control head. What other devices having a SeaTalk communications interface are installed onboard?
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] ST7001 autopilot controller not talking to S1 (Type 300) computer - Chuck - Raymarine - Moderator - 10-21-19 03:26 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication