[TG11] RV-100 Axiom9 depth issues
|
10-19-19, 10:52 PM
(This post was last modified: 11-05-19 02:51 AM by racerx.)
Post: #1
|
|||
|
|||
[TG11] RV-100 Axiom9 depth issues
Hi All,
Im really keen to get some feedback on issues with depth on a new Raymarine setup. I took delivery of a new dealer configured 6.2m aluminium fishing boat with a pair of flush mount Axiom 9’s, NEMA GPS module and an RV-100 transducer installed. - Both Axioms are running the latest updates and I sync via Navionics on iOS. - I’ve made a few dashboard cards for chart/sounder but all sounder settings have been left totally default. - I’ve made a few minor chart customisation to show live sonar data etc. - I’ve performed a “sounder reset†at some point but the issues persist. - I regularly lose the bottom with sonar and downvision (see videos) and there is no reliable way to get it back. - Realvision 3d is unreliable and sometimes produces intermittent mapping (see videos) - I’ve had 13 hours on the water, in water ~25meters to ~1.5meters and the issues are consistent. - Perhaps, maybe coming to a dead stop has returned the depth, but it is so intermittent it is hard to be sure. The videos show the issues really clearly, I also have a picture of transducer install attached too. |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
[TG11] RV-100 Axiom9 depth issues - racerx - 10-19-19 10:52 PM
RE: [TG11] RV-100 Axiom9 depth issues - Tom - Raymarine - Moderator - 10-29-19, 12:54 AM
|
User(s) browsing this thread: 1 Guest(s)