MyBB Internal: One or more warnings occured. Please contact your administrator for assistance.
[LW11] AXIOM TO AXIOM DATA


Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] AXIOM TO AXIOM DATA
10-30-19, 10:44 PM (This post was last modified: 11-06-19 04:13 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] AXIOM TO AXIOM DATA
I have a Axiom 7RV at the nav station. want to add a second to the helm station. Plan on connecting the 2 by raynet cable. can I use a basic Axiom 7 at the helm and still see the RV and other data or does it have to be a RV model? will the charts cross over the Raynet or do I need another chart? Do the charts have to be the same type, or could I use light house on one and Navionics on the other? I understand one has to be the data master and the other is the slave correct? Also wondering how to display a Yacht Devices Boat Barometer on my system. I plugged it in and it is sensing but not sure how to get it to display.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[LW11] AXIOM TO AXIOM DATA - Eheim - 10-30-19 10:44 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)