The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Autopilots v / [TG] [TG11] St5000+

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] St5000+
11-14-19, 02:58 AM (This post was last modified: 11-14-19 11:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
Geoff0499 Offline
Junior Member
**
 		Posts: 2
Joined: Mar 2019
Reputation: 0
[TG11] St5000+
I am having issues calibrating my autopilot - has previously worked well

I can complete the compass deviation correction getting a deviation of 4deg. The issue is with the heading alignment. I go thro the procedure and get the display heading to agree with my compass heading. I then exit the calibration screen

When I do this the alignment heading remains on the display irrespective of the heading of the boat. Ie set to say 180deg during calibration - after exiting calibration 180deg remains the displayed heading

Any advice appreciated

Thanks
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[TG11] St5000+ - Geoff0499 - 11-14-19 02:58 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication