[CA11] es78 Lighthouse II settings - Temperature Off-Set, Heading & Heading Line

[Chuck - Raymarine - Moderator]

JeepSWAG,

Fishfinder features cannot be share among the systems MFDs when they have been networked a SeaTalkng / NMEA 2000 backbone. Proper installation would require that the MFD's be interfaced to one another or to a HS5 RayNet Network Switch via an appropriate length of RayNet (F) to RayNet (F) Cable. Should the MFD's not have been interfaced to one another via Ethernet communications, then configuration of a temperature offset would only be permissible on the MFD which had been directly interfaced to the CPT-100 DownVision Transducer. That said, the other MFD should be able to display water temp (ENVIRONMENT->WATER TEMP->WATER TEMP). Per my last response, please ensure that the data item's label is "Water". If not, then the incorrect data item has been selected to be displayed. If so, then what numerical value is being displayed? Also, I am only aware of the products which you have listed. Should the system feature any other marine electronics products or be interfaced to any other devices (ex. engines, etc.), then please respond accordingly.