The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Multifunction Displays v / Connecting to Horizon GX2200 AIS, GPS, DSC?

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting to Horizon GX2200 AIS, GPS, DSC?
06-02-16, 10:50 AM
Post: #1
marchem Offline
Junior Member
**
 		Posts: 24
Joined: Mar 2016
Reputation: 0
Connecting to Horizon GX2200 AIS, GPS, DSC?
I was able to connect the AIS signal from my Standard Horizon GX2200 VHF to my e7D and can see all of the AIS data on the MFD (there appears to be a dedicated AIS NEMA 0183 line on the GX2200).

While planning I was wondering if there is any value in also connecting the DSC data from the VHF to the MFD, and the MFD output to the VHF? I assume that would also provide a second GPS/Location value for the MFD, but I'm not sure that would do anything?

Any thoughts on this would be much appreciated.
Rob Franks
Catalina 310 #31
Santa Cruz, CA
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
Connecting to Horizon GX2200 AIS, GPS, DSC? - marchem - 06-02-16 10:50 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication