Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] C80 Help
11-28-19, 09:06 AM (This post was last modified: 11-28-19 09:13 AM by Chuck - Raymarine - Moderator.)
Post: #8
RE: [CA11] C80 Help
370Larson,

Q. Any way having navigational charts and sonar charts would cause this issue?
A. Not typically, as these long retired MFDs, when operating the v5.16 software, were designed and tested by Raymarine for use with Navionics Silver, Gold, SonarCharts, HotMaps, HotMaps Platinum, and Platinum, some of which included SonarCharts. These MFDs have not been designed and tested for use with Navionics Platinum Plus and Nav+ chart cards (including NAV+ Region chart cards). Your suggestion to erase and re-populate the chart card may yield results. I wouldn't recommend loading any less cartography than would include a couple of states. When doing, consider not initially populating it with SonarCharts. Also, ensure that the MFD has been configured to nautical charts (NAV) rather than SonarCharts (FISH).

You may also want to test the MFD's compatibility with your adapter by commanding the MFD to save waypoints stored within the MFD's memory to the Navionics chart card. If successful, the MFD will indicate so. If not and should you have another microSD memory card which is 32GB or less in capacity, then you may also want to consider trying this test with the other microSD memory. The latter test may isolate the issue to the adapter or the Navionics chart card.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] C80 Help - 370Larson - 11-23-19, 03:24 PM
RE: [CA11] C80 Help - 370Larson - 11-25-19, 06:44 PM
RE: [CA11] C80 Help - 370Larson - 11-26-19, 10:39 PM
RE: [CA11] C80 Help - 370Larson - 11-27-19, 08:04 PM
RE: [CA11] C80 Help - Chuck - Raymarine - Moderator - 11-28-19 09:06 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)