Thread Closed 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
e95/Lighthouse questions
05-23-17, 11:00 AM (This post was last modified: 05-24-17 10:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
e95/Lighthouse questions
1. I set up a test race course with 3 marks. I then "started" the course. I had turned on Laylines in the MFD. As I approached the mark, I never saw any lay lines appear.
Find all posts by this user
05-24-17, 10:53 AM
Post: #2
RE: e95/Lighthouse questions
Welcome to the Raymarine Forum daknecht,

Q1. I set up a test race course with 3 marks. I then "started" the course. I had turned on Laylines in the MFD. As I approached the mark, I never saw any lay lines appear.

A1. Utilization of the Laylines feature is dependent upon sources of specific data within the system. Please respond with a list of the marine electronics products (makes and models) within your vessel's marine electronics system.
Find all posts by this user
05-26-17, 09:17 AM (This post was last modified: 05-26-17 09:18 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: e95/Lighthouse questions
Electronics system: e95 chart plotter, Seatalkng network, EV-1 Autopilot, Tactic wind routed to network through Raymarine T122, Noland AM43, Actisense NGW. The e95 is seeing the wind data on the network.
Find all posts by this user
05-26-17, 11:09 AM
Post: #4
RE: e95/Lighthouse questions
daknecht,

The Laylines feature is dependent upon True Wind data, the calculation of which in turn requires the data items specified within the FAQ found here. Based upon the information supplied, it does not appear that your system includes a source of Speed (through water) data, an as such the system will be unable to calculate True Wind.
Find all posts by this user
05-26-17, 12:57 PM (This post was last modified: 05-30-17 08:45 AM by Chuck - Raymarine - Moderator.)
Post: #5
RE: e95/Lighthouse questions
Thanks for clarifying.
Find all posts by this user
05-30-17, 08:45 AM
Post: #6
RE: e95/Lighthouse questions
You're welcome.
Find all posts by this user
Thread Closed 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)