ST6000 Disengaging to Standby
|
04-25-17, 05:11 PM
(This post was last modified: 04-26-17 07:58 AM by Chuck - Raymarine - Moderator.)
Post: #11
|
|||
|
|||
RE: ST6000 Disengaging to Standby
OK, thanks.
Where is Aero Marine Services? I live in BC Canada. |
|||
04-26-17, 08:02 AM
Post: #12
|
|||
|
|||
RE: ST6000 Disengaging to Standby
David,
The link to Aero Marine Services has been corrected within my prior response. Aero Marine Services is located in Chicago, IL. |
|||
06-01-17, 05:06 PM
(This post was last modified: 06-02-17 09:11 AM by Chuck - Raymarine - Moderator.)
Post: #13
|
|||
|
|||
RE: ST6000 Disengaging to Standby
Hi Chuck,
I contacted Aero Marine. Their answer was to upgrade the whole system. I can't afford to do that. So, can you confirm that the course computers you named above can replace the Type 100 without me having to replace any of the connected items please? Thank you, David. |
|||
06-02-17, 09:13 AM
(This post was last modified: 06-02-17 09:19 AM by Chuck - Raymarine - Moderator.)
Post: #14
|
|||
|
|||
RE: ST6000 Disengaging to Standby
David,
Q: an you confirm that the course computers you named below can replace the Type 100 without me having to replace any of the connected items please? - SPX-30 - S3G SmartPilot - S3 - Type 400G - Type 400 A: Yes. That said, the performance of the Evolution autopilots is significantly better than that of the autopilot course computers listed above (I have had one of these autopilots onboard my own boat), coupled with the fact that the of those autopilot course computers listed, parts and service are only available for the SPX-30, prudence should be exercised when considering investment in a second hand replacement autopilot course computer. |
|||
06-02-17, 09:26 AM
(This post was last modified: 06-02-17 09:34 AM by Chuck - Raymarine - Moderator.)
Post: #15
|
|||
|
|||
RE: ST6000 Disengaging to Standby
Thank you Chuck. I agree with your prudence approach, but I cannot afford a new system. I also have a problem having to replace all the peripherals when they are all working fine:)
|
|||
06-28-17, 09:41 AM
(This post was last modified: 06-28-17 12:58 PM by Chuck - Raymarine - Moderator.)
Post: #16
|
|||
|
|||
RE: ST6000 Disengaging to Standby
Hi Chuck,
Through further research here in British Columbia I found a Certified Raymarine Technician at LeftMost Yacht Services in Langley BC. I sent my Type 100 Course Computer to him and a week later I have it back installed and working perfectly in the boat. My legacy system, which does all I need, is working again:) Tel: 778 227 5389 email: [email protected] Perhaps other Raymarine owners in my situation will want to know this. Thanks, David. |
|||
06-28-17, 01:00 PM
Post: #17
|
|||
|
|||
RE: ST6000 Disengaging to Standby
David,
We're glad to learn of the success which you have had in obtaining service for your Type 100 Autopilot Course Computer. Thanks for the recommendation. |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)