Raymarine forum / Raymarine Forums / Multifunction Displays v / eS128 control knob intermittent

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
eS128 control knob intermittent
10-17-17, 03:41 PM
Post: #1
zzzxxx Offline
Junior Member
**
 		Posts: 7
Joined: Oct 2016
Reputation: 0
eS128 control knob intermittent
The main control knob on the top of my eS128 will not function properly when I rotate the knob. Maybe only 1 click out of 15 will result in the proper operation. Any easy way to fix this?
thanks,
Jack
Find all posts by this user
Quote this message in a reply
10-17-17, 03:55 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: eS128 control knob intermittent
Welcome to the Raymarine Forum Jack,

We're sorry to learn of the reported issue with your eS128. When traversing menus or ranging a chart the each click of the MFD's rotary knob should result in movement to the next item within a menu or result in ranging the chart in or out. In this case it appears that the MFD's UniController has suffer a failure necessitating that it be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication