Raymarine forum / Raymarine Forums / Networking / System Integration v / [CA] Seatalk to Es97 Diagram

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] Seatalk to Es97 Diagram
01-23-18, 09:18 AM (This post was last modified: 01-23-18 01:34 PM by Chuck - Raymarine - Moderator.)
Post: #1
Bwhay320 Offline
Junior Member
**
 		Posts: 1
Joined: Jan 2018
Reputation: 0
[CA] Seatalk to Es97 Diagram
Greetings, I am updating the GPS plotter after purchasin a Es97.I am currently running SeaTalk 1 network. I have studied the manuals and postings on this webpage and think I have it figured out but would appreciate feedback if this is not best practice. Please see attachment.

Does this appear to be correctly configured to establish a Seatalkng backbone?

Thank you for your help.


Attached File(s)
.png  SEATALK NETWORK V1.png (Size: 202.49 KB / Downloads: 436)
Find all posts by this user
Quote this message in a reply
01-23-18, 01:34 PM (This post was last modified: 01-23-18 01:34 PM by Chuck - Raymarine - Moderator.)
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] Seatalk to Es97 Diagram
Welcome to the Raymarine Forum Bwhay320,

Your diagram looks great and reflects the method that would be used to interface the products you have listed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication