(DG) power steering s3g
|
04-15-18, 09:31 AM
(This post was last modified: 04-16-18 07:22 AM by Derek - Raymarine - Moderator.)
Post: #1
|
|||
|
|||
(DG) power steering s3g
Hello, is there a way to make the s3g steer to a specific rudder angle as used with power steering? What control unit(s) could make this happen if so?
I have 6001, 6002, smartcontroller, s100. Any of those able to put it into power steering mode? Thanks! Rob |
|||
04-16-18, 07:27 AM
(This post was last modified: 04-16-18 07:28 AM by Derek - Raymarine - Moderator.)
Post: #2
|
|||
|
|||
RE: (DG) power steering s3g
Hi robban99
Thankyou for your enquiry. The only way to do this is to fit a joystick controller, this joystick controller connects to an interface box which connects direct to SeaTalk and then to the S3G course computer. Then select BANG-BANG mode in the course computer calibration and the rudder will move to a set position when the joystick operation is selected regards |
|||
04-17-18, 12:56 PM
Post: #3
|
|||
|
|||
RE: (DG) power steering s3g
Hi, thanks for the response!
I guess that is kind of a semi-permanent solution? I was hoping for a software mode where I could select between normal auto pilot and power steering. But you can't have it all...cheers! |
|||
04-18-18, 03:17 AM
Post: #4
|
|||
|
|||
RE: (DG) power steering s3g
Hi robban99,
Yes, you would need the joystick hardware, but other than that it would work fine, regards |
|||
« Next Oldest | Next Newest »
|
User(s) browsing this thread: 2 Guest(s)