Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] C97 connection to older Yamaha

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] C97 connection to older Yamaha
04-24-18, 10:00 PM (This post was last modified: 04-25-18 04:09 PM by Chuck - Raymarine - Moderator.)
Post: #1
Iwhitevt Offline
Junior Member
**
 		Posts: 8
Joined: Jul 2017
Reputation: 0
[CA] C97 connection to older Yamaha
Is it possible to replace my 2006 yamaha digital gauges by interfacing the motors to my c97's?

If yes, is there additional information on this? Would it monitor all the same functions- rpm, fuel use, alerts, etc?

Thanks!
Find all posts by this user
Quote this message in a reply
04-25-18, 04:15 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA] C97 connection to older Yamaha
Welcome to the Raymarine Forum Iwhitevt,

Please click here to view a FAQ addressing this subject. Should you determine that your engines feature Yamaha Command Link or Command Link Plus, then please click here to check your engines against the list of Yamaha engines supported by the ECI-100 Engine Gateway. The list of supported engine data items will vary will the data output by the engines. See the previously referenced FAQ for a list of possible engine data items which may be displayed.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication